A noon report is a data sheet prepared by the ship’s chief engineer on a daily basis. The report provides the vessel’s position and other relevant standardised data to assess the performance of the ship based on its speed and environmental forces including weather conditions.
Noon report is also used by ship managers to assess the difference in the performance of the vessels or between two similar types of ships (sister ships) to outline solutions for underperformance or possible issues.
A noon report is a data sheet prepared by the ship’s chief engineer on a daily basis. The report provides the vessel’s position and other relevant standardised data to assess the performance of the ship based on its speed and environmental forces including weather conditions.
Noon report is also used by ship managers to assess the difference in the performance of the vessels or between two similar types of ships (sister ships) to outline solutions for underperformance or possible issues.
The chief engineer is responsible for preparing and sending the noon report to the company and shore management at a fixed time on daily basis (normally it is sent during noon, hence it’s called noon report).
Deck officer (normally 2nd officer) assists the chief engineer in providing the required data, which are used to complete the noon report. The master has the overall responsibility to ensure that the noon report is sent to the company on time.
Below is a general overview of the content of a noon report and how they are recorded:
•Ship’s Name: Name or Call sign of the ship
•Voyage number: Every noon report comes with the current voyage number where the ship is plying
•Date of the report: Date of noon report
•Time of the report: Time of noon report. Chief engineer and ship staff must ensure that the noon report is sent daily at same time
•Position of the ship: The position of ship taken from GPS of the ship in Latitude and Longitude at the time of noon (or time of report preparation)
•Average speed done since last submitted noon report in knots: The average speed is calculated out from the net speed of the ship in knots since last noon report
•Average RPM: Average RPM Of the propulsion engine/ engines
•Wind Direction and wind force: The force and direction of the wind
•Sea and swell condition: General sea and swell condition at the time of report preparation
•Distance to Next Port of call/ destination: The distance which the ship needs to cover to reach the next port
•Estimated Time of Arrival: The Deck officer will calculate the ETA for the next port of call
•R.O.B : Following “Remaining on board” are prepared by the chief engineer where he/she takes account of either all Fuel oil/lube oil/water present on board ship or excluding the oil/water which are in the daily consumption or service tanks to keep a safe margin.
Use of Noon Report:
The noon report is used to analyse the following parameters and performance:
– Consumption of fuel and lube on daily basis
– Total weight of cargo carried
– Distance covered from last port
– Distance to be covered for next port f call
– Time taken to complete the passage
– Time taken for port operation
– To order fuel/ lube oil as required
– To order fresh water as required
– To calculate the Energy Efficiency Operation Indicator
The noon report is one of the important documents on board ships that is recorded ad used for future references.
Discussion about this post